Primera Signature Guide de l'utilisateur télécharger pdf (Page 23)

CLEANING THE PRINT HEAD

A dirty print head will produce bad print quality.

Perform the following steps to clean the print head when it

becomes dirty.

Note: Use a cotton bud stick or other soft material to clean

the print head.

1. Click on file and select “Clean Print Head…” on the drop down

menu. (See Figure 7)

Figure 7

3. The Carriage will move to the cleaning position. Unplug the Power

Cable and the USB Cable before cleaning the Print Head.

Click Ok.

4. Use a cotton bud stick moistened with alcohol to clean the print

head. You can also use a commercially available cassette tape

recorder head cleaning kit to clean the print head. Insert the tip of

the cotton bud stick and slide it lightly back and fro along the area

shown in the Figure 8.

5. Plug the 2 cables back and continue printing.

Figure 8

2. Click OK to continue.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

Pas de commentaire

Primera Signature Guide de l'utilisateur Page 23