Primera LX200 Manuel d'utilisateur télécharger pdf (Page 39)

Troubleshooting 35

C. CLEARING A LABEL JAM

If there is a label jam in the printer mechanism first attempt to

remove the jam by opening the cover and removing the jam

from the printer feed output area.

If the jam can not be located, it is possible to remove a cover

over the feed input area. Pull on the center of the cover as

shown below to release the tabs on the sides.

To prevent future jams, use rubbing alcohol to remove an

adhesive left in the printer feed area.

D. CLEANING THE PRINTER

If any ink has gotten on to the printer casing itself, the case of

the printer can be cleaned with an ammonia based window

cleaner and a lint-free cloth.

Over time, ink overspray may gather at the base of the printer.

The printer is designed using a vacuum system to gather most

of this ink on a series of saturation pads. Eventually, these

pads may need to be replaced. Contact tech support to

determine if pad replacement is necessary.

PULL

511203.qxd 8/8/2008 8:04 AM Page 35

TOC

INDEX

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45

Pas de commentaire

Primera LX200 Manuel d'utilisateur Page 39